Shop

WTD – Ford E-Series Rear Bumper (Optional Dual Swing)
October 7, 2021
WTD – Chevrolet Express Coilover Conversion System 4×4
October 7, 2021

WTD – Ford E-Series Pre-Runner Bumper

$1,800.00

-

Available on backorder

Complete The Look

Additional product add-ons

  • *

    WTD – Chevrolet Express 4×4 Front Diff Skid Plate
    October 19, 2021
    WTD – Aluminess Box
    October 22, 2021

    WTD – Classic Top Hoop

    $400.00

    -

    Reviews

    There are no reviews yet.

    Only logged in customers who have purchased this product may leave a review.

    ×
    WTD – Front Bumper Receiver Hitch Mount
    December 27, 2021
    WTD – Ford E-Series Sway Bar/I-Beam Upgrade
    December 28, 2021

    WTD – Grill Guard

    $600.00

    -

    Reviews

    There are no reviews yet.

    Only logged in customers who have purchased this product may leave a review.

    ×
    WTD- Chevrolet Express Baja Rear Bumper
    May 9, 2022
    Falken Wildpeak H/T02 Tire – 235/85/16
    June 23, 2022

    WTD – Ford E-Series Baja Pre-Runner Bumper Light Bracket

    $150.00

    -

    WTD – FORD E-SERIES BAJA PRE-RUNNER BUMPER LIGHT BRACKET: QTY 1 (POWDERCOATED)
    MOUNTING HARDWARE

    If you’re looking to run lower driving/fog lights on your WTD – Ford E-Series Baja Pre-Runner Bumper, these are the mounts you’ll need!

    Reviews

    There are no reviews yet.

    Only logged in customers who have purchased this product may leave a review.

    You may also like…

    • WTD – Ford E-Series Tube Winch Bumper
      $2,100.00

      -

    • Lightforce Venom LED Driving Light
      $329.00

      -

    • Lightforce HTX2 HID & LED Hybrid Driving Light
      $650.00

      -

    ×
    Method Race Wheels 702
    October 7, 2021
    Growing Up Garage Hat
    October 7, 2021

    Lightforce Venom LED Driving Light

    $329.00

    -

    VENOM LED LIGHT – QTY 1
    CLEAR SPOT FILTER – QTY 1
    REVERSIBLE MOUNTING BRACKET (FITTED TO LIGHT) – QTY 1
    M10 X 35MM STAINLESS STEEL HEX BOLTS WITH WASHERS AND NYLOC NUTS (SIDE BOLTS FITTED TO LIGHT) – QTY 2
    M10 X 35mm STAINLESS STEEL HEX BOLTS WITH WASHERS AND NYLOC NUT (FITTED TO BRACKET FOR MOUNTING) – QTY 1
    4 PIN HIGH CURRENT WATERPROOF HARNESS ADAPTOR – QTY 1
    USER INSTRUCTIONS – QTY 1

    The Australian designed and made Venom LED packs a generous beam of 1 Lux @ 850m into a compact housing, perfect for any application. Providing increased audio clarity with the inclusion of CISPR25 compliant reduced radio frequency interference technology, Venom LED assists in getting you to your destination in comfort, with safety always at the forefront.

    FEATURES
    – 75W of LEDs within a 150mm housing
    – 21 x Lumileds LEDs provide generous distance
    – 3 Stage Operation: switch from full intensity to daytime or night-time running light
    – CISPR25 compliant reducing radio frequency interference
    – Cast aluminum housing and bezel
    – Hard-wearing UV stable powdercoat finish
    – Reverse polarity voltage protection
    – High current waterproof connectors
    – IP69K rated to protect against moisture and contaminant ingress
    – Totally dust tight & resistant to close range, high pressure, high-temperature spray downs
    – Genuine Gore® Waterproof Membrane with mechanical seal
    – Thermal overload protection impact-resistant polycarbonate filter
    – Lifetime Warranty

    Reviews

    There are no reviews yet.

    Only logged in customers who have purchased this product may leave a review.

    ×

Product total

Options total

Grand total

WTD – FORD E-SERIES BAJA PRE-RUNNER BUMPER: QTY 1 (POWDERCOATED)
MOUNTING HARDWARE

The WTD Ford E-Series Baja Pre-Runner Bumper is a simplistic design, which gives your van a unique look with function. A 2″ main tube, which follows the factory body lines of the 2008-current Ford E-Series, keeps this bumper in tight to the body, giving it that trophy truck appearance.

This bumper is compatible with the 1992-2007 Ford E-Series however, it will extend further out from the body. Please see pictures in the gallery.

The Baja Pre-runner bumper does not allow you to run a winch. If you would like to run a winch, please see our WTD – Ford E-Series Tube Winch Bumper

***Not compatible with Front Receiver Hitch***

BUMPER WEIGHT+ CLASSIC TOP HOOP+ GRILL GUARD
120 LBSXX

INSTALL LABOR – FRONT BUMPER ONLY – $260
(LIGHTING IS ADDITIONAL)

YEARMAKEMODEL
1992 - 2007FORD E-SERIESE-150 | E-250 | E-350 | E-450
2008-CURRENTFORD E-SERIESE-150 | E-250 | E-350 | E-450

Ford E-Series Baja Pre-Runner Bumper Instructions

FES-PRB Instructions

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

You may also like…

  • Lightforce HTX2 HID & LED Hybrid Driving Light
    $650.00

    -

  • WTD – Ford E-Series Tube Winch Bumper
    $2,100.00

    -

  • Lightforce Venom LED Driving Light
    $329.00

    -

You were not leaving your cart like that, right?

Enter your details below to save your shopping cart for later.