Shop

Ford Class C OEM Wheel
July 2, 2024
WTD – Ford Transit 5″ 2WD Class B/C RV Lift Kit
July 9, 2024

WTD – Ford Transit AWD 2″ RV Kit

$4,170.00$4,425.00

Recommended Add-On

Looking for a simple way to adjust your caster once the WTD LCA are installed? Our In-Line Adjuster allows you to make small caster adjustments, which simplifies the alignment process by not having to remove the rear heim pivot bolt. *Note: You cannot convert a Gen 2 LCA to a Gen 3 (In-Line Caster Adjuster)

Product total

Options total

Grand total

LOWER CONTROL ARM – QTY 2
ALUMINUM LIFT SPACER – QTY 2
REAR PROGRESSIVE LEAF SPRINGS – QTY 2
2.0 FOX SHOCK – QTY 2
HARDWARE KIT

The WeldTec Designs Ford Transit AWD 2″ RV Kit will give your RV a completely new look. When it came to designing this kit, we knew we wanted more articulation from the lower control arms. In order to accomplish this, we designed a new lower control arm, which uses a 3/4 heim to allow for 10″ of articulation.  This arm also give you 1.5 degrees of camber adjustment as well as increased caster capability in the heim joint. To correct the camber and achieve 2” of lift we designed a 2-piece 6061 billet aluminum shock spacer, which gives you the option to use your OEM shock or run an aftermarket one. Lastly, we all want bigger tires, which are great for the trails or highways. This kit allows you to run up to 265x70x16 tire (trimming is necessary to fit).

Moving on to the rear suspension. We did what we do best, by matching your vehicle weight and height to the spring rate required to give you the best ride possible by using our rear progressive leaf springs. The 2″ RV Kit is the perfect addition for your Ford Transit build.

TECH NOTES:

With most lift kits you are changing the angle of the suspension like the lower control arm. As this arm is pushed down with the lift on the Ford Transit it is making the “track width” distance smaller. This change will create plunge in the axle at the new ride height with lift and increase with down travel or articulation. Due to the short axle on the passenger side it has a worse effects.
With the WeldTec Designs AWD lift kit includes a fabricated lower control arm and 2″ strut spacer. The benefit of the new WTD LCA is it maintains the same track width with the lift as OEM. This reduces the axle plunge at the new ride height and as the wheel travel up and down. This is how the CV axle bind is reduced on the WTD lift kit.

Tire sizes vary between manufactures and this kit does REQUIRE trimming the lower front bumper as well as the pinch weld and plastic on the door side. At full steering lock the wheel may rub the sub frame which can be eliminated by running a 3/16 thick wheel spacer.

Key Points:
Fully Fabricated Lower Control Arms
2-Piece 6061 Billet Coil Lift/Camber Correction Spacers
2” of Suspension Lift
Increased Wheel Articulation
Maintains Factory Track Width
More Clearance for Larger Tires
Powder Coated Finish
Made in the USA

LIFTWHEEL TRAVELWHEEL SIZELUG PATTERNBACKSPACINGOFFSETBORETIRE SIZE
2" FRONT | 0" REAR0’’ FRONT | 0’’ REAR16x7.55x1606.20+5065.00255/70/16 (NO TRIMMING)
Vehicle TypeGround to RockerGround to Entry StepGround to CargoGround to RoofTire SizeLift SizeOverall HeightHeight with Roof RackOverall LengthLength with Bumper
High Roof16.5"32.25"23.5"9"265/75R162" 9"N/A21.9'22'9"

FRONT INSTALL LABOR – $1080 (6 HRS)
REAR INSTALL LABOR – $720 (4 HRS)
ALIGNMENT – $160

YEARMAKEMODEL
2015-CURRENTFORDTRANSIT AWD 350 (6 Lug DRW)

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

You were not leaving your cart just like that, right?

You were not leaving your cart like that, right?

Enter your details below to save your shopping cart for later.