Shop

WTD – Chevrolet Express 4×4 Coilover Conversion
October 7, 2021
WTD – Chevrolet Express Ultra Bench Seat Conversion
October 7, 2021

RP – Heavy Duty Tie Rod Assembly (4WD)

$710.96

-

Available on backorder

Complete The Look

Additional product add-ons

  • *

    Ford Transit Ball Joint (Pair) Installed
    February 16, 2022
    RP – Extreme Duty Idler Arm Bracket Assembly
    February 22, 2022

    RP – Extreme Duty Pitman Arm (3-Spline)

    $153.95

    -

    EXTREME DUTY PITMAN ARM (3 SPLINE) – QTY 1
    HARDWARE

    Rare Parts Extreme Duty Pitman Arm # 20609 is designed for use on specific GM Trucks and SUV’s. The # 20609 will ONLY fit models equipped with 3 Master Spline steering boxes. You MUST verify that your vehicle has 3 Master Splines. It is fairly common knowledge that larger tires increase the amount of wear and tear on a vehicle. Rare Parts designed their line of Extreme Duty steering parts to withstand the added abuse that lifted and leveled trucks and SUV’s place on the steering components. Our advice is spend a little more money and upgrade your vehicle with the Extreme Duty Pitman Arm. You will enjoy longer component life, better steering feel and improved tire wear. Rare Parts 20609

    • Cold headed 30mm full ball stud – Eliminates binding between pitman and idler arm
    • Induction through hardened and annealed SAE 4140 stud provides extreme wear resistance
    • heat treated steel race
    • Powder metal upper bearing
    • SAE 1541 forged and heat treated forging with increased size for maximum strength
    • relocated grease fitting for easy access
    • Available for 3 master spline and 4 master spline gear boxes
    • Made in the USA

    INSTALL LABOR –

    YEARMAKEMODEL
    2003-CURRENTCHEVROLET EXPRESS/GMC SAVANA2500/3500 4WD "Must have 3" Quigley lift or WTD 4x4 lift"

    Reviews

    There are no reviews yet.

    Only logged in customers who have purchased this product may leave a review.

    ×
    RP – Extreme Duty Pitman Arm (3-Spline)
    February 22, 2022
    RP – Extreme Duty Idler Arm
    February 22, 2022

    RP – Extreme Duty Idler Arm Bracket Assembly

    $223.95

    -

    EXTREME DUTY PIDLER ARM BRACKET ASSY – QTY 1
    HARDWARE

    This high performance extreme duty idler arm bracket was designed for serious van owners who depend on their vans for work and play.  This sealed unit offers a dual tapered roller bearing design that comes with heavy duty grade 8 mounting hardware. Easy replacement.

    • Dual tapered roller bearings
    • Sealed zero-maintenance design
    • Heat treated tapered stud
    • Includes weld in gusset as a bonus
    • Lightweight aluminum housing
    • Direct bolt-on replacement
    • Made in the USA

    INSTALL LABOR –

    YEARMAKEMODEL
    2003-CURRENTCHEVROLET EXPRESS/GMC SAVANA2500/3500 4WD "Must have 3" Quigley lift or WTD 4x4 lift"

    Reviews

    There are no reviews yet.

    Only logged in customers who have purchased this product may leave a review.

    ×
    RP – Extreme Duty Idler Arm Bracket Assembly
    February 22, 2022
    WTD – Chevrolet Express 4×4 Suspension Lift
    February 25, 2022

    RP – Extreme Duty Idler Arm

    $164.24

    -

    EXTREME DUTY PITMAN ARM (3 SPLINE) – QTY 1
    HARDWARE

    Rare Parts Extreme Duty Idler Arm is designed for use on specific GM Vans.  It is fairly common knowledge that larger tires increase the amount of wear and tear on a vehicle. Rare Parts designed their line of Extreme Duty steering parts to withstand the added abuse that lifted and leveled van’s place on the steering components. Our advice is spend a little more money and upgrade your vehicle with the Extreme Duty Idler Arm. You will enjoy longer component life, better steering feel and improved tire wear.

    • Extreme duty
    • Cold headed stud with reverse pin prevents center link roll
    • Induction through hardened and annealed SAE 4140 stud provides extreme wear resistance
    • Heat treated steel race
    • Powder metal upper bearing
    • Heat treated steel bearing
    • Relocated grease fitting for easy access
    • Made in the USA

    INSTALL LABOR –

    YEARMAKEMODEL
    2003-CURRENTCHEVROLET EXPRESS/GMC SAVANA2500/3500 4WD "Must have 3" Quigley lift or WTD 4x4 lift"

    Reviews

    There are no reviews yet.

    Only logged in customers who have purchased this product may leave a review.

    ×

Product total

Options total

Grand total

HD TIE ROD ASSEMBLY 4WD – QTY 2
HARDWARE

Are you ready to upgrade your Chevrolet Express 2500/3500 4×4 steering?

We have teamed up with Rareparts to bring you the ultimate steering upgrade that retains the use of heavy duty tie rods. These steering parts are the perfect replacement parts for your Chevrolet Express 2500/3500 IFS front suspension for strength and durability.

HEAVY DUTY TIE ROD ASSEMBLIES

  • Extreme duty design
  • Massive 1.5” tie rod end forgings
  • Full ball studs
  • Heat-treated components
  • Greaseable steel-on-steel internal design
  • Increased stud swing
  • No modifications necessary
  • Sold in pairs

INSTALL LABOR – $520

YEARMAKEMODEL
2003-CURRENTCHEVROLET EXPRESS/GMC SAVANA2500/3500 4WD "Must have 3" Quigley lift or WTD 4x4 lift"

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

You were not leaving your cart like that, right?

Enter your details below to save your shopping cart for later.